From 284b1cb8ae6c3d62b676ece06be519b147dd028e Mon Sep 17 00:00:00 2001 From: E3D-Online Ltd <josh+git@e3d-online.com> Date: Wed, 17 Mar 2021 14:31:45 +0000 Subject: [PATCH] Delete sys directory --- sys/bed.g | 13 ------ sys/brush.g | 19 -------- sys/cancel.g | 12 ----- sys/config.g | 124 -------------------------------------------------- sys/homeall.g | 12 ----- sys/homec.g | 13 ------ sys/homex.g | 25 ---------- sys/homey.g | 24 ---------- sys/homez.g | 28 ------------ sys/pause.g | 4 -- sys/prime.g | 31 ------------- sys/purge.g | 31 ------------- sys/tfree0.g | 27 ----------- sys/tfree1.g | 27 ----------- sys/tfree2.g | 27 ----------- sys/tfree3.g | 27 ----------- sys/tpost0.g | 14 ------ sys/tpost1.g | 14 ------ sys/tpost2.g | 14 ------ sys/tpost3.g | 14 ------ sys/tpre0.g | 27 ----------- sys/tpre1.g | 26 ----------- sys/tpre2.g | 26 ----------- sys/tpre3.g | 27 ----------- 24 files changed, 606 deletions(-) delete mode 100644 sys/bed.g delete mode 100644 sys/brush.g delete mode 100644 sys/cancel.g delete mode 100644 sys/config.g delete mode 100644 sys/homeall.g delete mode 100644 sys/homec.g delete mode 100644 sys/homex.g delete mode 100644 sys/homey.g delete mode 100644 sys/homez.g delete mode 100644 sys/pause.g delete mode 100644 sys/prime.g delete mode 100644 sys/purge.g delete mode 100644 sys/tfree0.g delete mode 100644 sys/tfree1.g delete mode 100644 sys/tfree2.g delete mode 100644 sys/tfree3.g delete mode 100644 sys/tpost0.g delete mode 100644 sys/tpost1.g delete mode 100644 sys/tpost2.g delete mode 100644 sys/tpost3.g delete mode 100644 sys/tpre0.g delete mode 100644 sys/tpre1.g delete mode 100644 sys/tpre2.g delete mode 100644 sys/tpre3.g diff --git a/sys/bed.g b/sys/bed.g deleted file mode 100644 index f8e5093..0000000 --- a/sys/bed.g +++ /dev/null @@ -1,13 +0,0 @@ -; Bed Mesh Leveling - -G28 Z - -G1 S2 Z3 F5000 ; lift Z 3mm - -G29 - -;disable mesh leveling, needs to be enabled at the start of your print and disabled again when finished. -G29 S2 - -; Park the head -G1 X150 Y-49 F50000 diff --git a/sys/brush.g b/sys/brush.g deleted file mode 100644 index dae40ba..0000000 --- a/sys/brush.g +++ /dev/null @@ -1,19 +0,0 @@ -;Drop Bed -G91 -G1 Z2 F2000 -G90 - -;brush in -G1 X-32.5 Y124 F50000 -G1 X-35.5 Y155 F50000 -G1 X-38.5 Y124 F50000 -G1 X-41.5 Y155 F50000 - -;Brush Out -G1 X-41.5 Y155 F50000 -G1 X-32.5 Y150 F50000 -G1 X-41.5 Y145 F50000 -G1 X-32.5 Y140 F50000 -G1 X-41.5 Y135 F50000 -G1 X-32.5 Y130 F50000 -G1 X-41.5 Y125 F50000 diff --git a/sys/cancel.g b/sys/cancel.g deleted file mode 100644 index 399433a..0000000 --- a/sys/cancel.g +++ /dev/null @@ -1,12 +0,0 @@ -; Disable Mesh Compensation. -G29 S2 - -; purge tool -;M98 Ppurge.g - -; park tool -T-1 - -; Heaters off -;M0 - diff --git a/sys/config.g b/sys/config.g deleted file mode 100644 index 8278ba8..0000000 --- a/sys/config.g +++ /dev/null @@ -1,124 +0,0 @@ -; Configurat; Configuration file for Duet WiFi / Ethernet -; executed by the firmware on start-up - -; General preferences -M111 S0 ; Debugging off -G21 ; Work in millimetres -G90 ; Send absolute coordinates... -M83 ; ...but relative extruder moves -M555 P2 ; Set firmware compatibility to look like Marlin - -; Network -; Read https://duet3d.dozuki.com/Wiki/Gcode#Section_M587_Add_WiFi_host_network_to_remembered_list_or_list_remembered_networks -M550 P"ToolChanger" ; Set machine name -M552 S1 ; Enable Networking -M586 P0 S1 ; Enable HTTP -M586 P1 S0 ; Disable FTP -M586 P2 S0 ; Disable Telnet - -M667 S1 ; Select CoreXY mode - -; Endstops -M574 X1 Y1 S3 ; Set X / Y endstop stall detection -M574 Z1 S2 ; Set Z endstop probe -M558 P7 X0 Y0 Z2 H3 F360 I0 T20000 ; Set Z probe type to switch, the axes for which it is used and the dive height + speeds -G31 P200 X0 Y0 Z0 ; Set Z probe trigger value, offset and trigger height -M557 X10:290 Y20:180 S40 ; Define mesh grid - -; Drive direction -M569 P0 S0 ; Drive 0 X -M569 P1 S0 ; Drive 1 Y -M569 P2 S1 ; Drive 2 Z -M569 P3 S0 ; Drive 3 E0 -M569 P4 S0 ; Drive 4 E1 -M569 P5 S1 ; Drive 5 E2 -M569 P6 S1 ; Drive 6 E3 -M569 P7 S0 ; Drive 7 COUPLER -M569 P8 S0 ; Drive 8 UNUSED -M569 P9 S0 ; Drive 9 UNUSED - -M584 X0 Y1 Z2 C7 E3:4:5:6 ; Apply custom drive mapping -M208 X-35:328.5 Y-49:243 Z0:300 C0:260 S0 ; Set axis maxima & minima -M350 C8 I0 ; Configure microstepping without interpolation -M350 X16 Y16 Z16 E16:16:16:16 I1 ; Configure microstepping with interpolation -M92 X100 Y100 Z1600 C100 E834:834:834:834 ; Set steps per mm -M566 X400 Y400 Z8 C2 E2:2:2:2 ; Set maximum instantaneous speed changes (mm/min) -M203 X35000 Y35000 Z1200 C5000 E5000:5000:5000:5000 ; Set maximum speeds (mm/min) -M201 X6000 Y6000 Z400 C400 E2500:2500:2500:2500 ; Set accelerations (mm/s^2) -M906 X2000 Y2000 Z1330 C400 E1680:1680:1680:1680 I30 ; Set motor currents (mA) and motor idle factor in percent -M84 S120 ; Set idle timeout - -;Stall Detection -M915 C S5 F0 H200 ; Coupler - -;Stall Detection -M915 X Y S5 F0 H400 ; X / Y Axes - -; Heaters -M305 P0 T100000 B4725 C7.06e-8 ; Set thermistor -M143 H0 S225 ; Set temperature limit for heater 0 to 225C - -M305 S"T0" P1 T100000 B4725 C7.06e-8 ; Set thermistor -M143 H1 S300 ; Set temperature limit for heater 1 to 300C - -M305 S"T1" P2 T100000 B4725 C7.06e-8 ; Set thermistor -M143 H2 S300 ; Set temperature limit for heater 2 to 300C - -M305 S"T2" P3 T100000 B4725 C7.06e-8 ;Set thermistor -M143 H3 S300 ; Set temperature limit for heater 3 to 300C - -M305 S"T3" P4 T100000 B4725 C7.06e-8 ; Set thermistor -M143 H4 S300 ; Set temperature limit for heater 4 to 300C - - -; Tools -M563 P0 S"T0" D0 H1 F2 ; Define tool 0 -G10 P0 X0 Y0 Z0 ; Reset tool 0 axis offsets -G10 P0 R0 S0 ; Reset initial tool 0 active and standby temperatures to 0C - -M563 P1 S"T1" D1 H2 F4 ; Define tool 1 -G10 P1 X0 Y0 Z0 ; Reset tool 1 axis offsets -G10 P1 R0 S0 ; Reset initial tool 1 active and standby temperatures to 0C - -M563 P2 S"T2" D2 H3 F6 ; Define tool 2 -G10 P2 X0 Y0 Z0 ; Reset tool 2 axis offsets -G10 P2 R0 S0 ; Reset initial tool 2 active and standby temperatures to 0C - -M563 P3 S"T3" D3 H4 F8 ; Define tool 3 -G10 P3 X0 Y0 Z0 ; Reset tool 3 axis offsets -G10 P3 R0 S0 ; Reset initial tool 3 active and standby temperatures to 0C - -; Fans -M106 P0 S0 ; UNUSED -M106 P1 S255 H1 T70 ; T0 HE -M106 P2 S0 ; T0 PCF -M106 P3 S255 H2 T70 ; T1 HE -M106 P4 S0 ; T1 PCF -M106 P5 S255 H3 T70 ; T2 HE -M106 P6 S0 ; T2 PCF -M106 P7 S255 H4 T70 ; T3 HE -M106 P8 S0 ; T3 PCF - -M593 F50 ; cancel ringing at 50Hz (https://forum.e3d-online.com/threads/accelerometer-and-resonance-measurements-of-the-motion-system.3445/) -;M376 H15 ; bed compensation taper - -;tool offsets -; !ESTIMATED! offsets for: -; V6-tool: X-9 Y39 Z-5 -; Volcano-tool: X-9 Y39 Z-13.5 -; Hemera-tool: X-37.5 Y43.5 Z-6 - -G10 P0 X-9 Y39 Z-5 ; T0 -G10 P1 X-9 Y39 Z-5 ; T1 -G10 P2 X-9 Y39 Z-5 ; T2 -G10 P3 X-9 Y39 Z-5 ; T3 - -;deselect tools -T-1 - -;M572 D0 S0.2 ; pressure advance T0 -;M572 D1 S0.2 ; pressure advance T1 -;M572 D2 S0.2 ; pressure advance T2 -;M572 D3 S0.2 ; pressure advance T3 - -M501; load config-override.g diff --git a/sys/homeall.g b/sys/homeall.g deleted file mode 100644 index b19066f..0000000 --- a/sys/homeall.g +++ /dev/null @@ -1,12 +0,0 @@ -; homeall.g -; called to home all axes - -M98 Phomec.g ; Home C (ToolHead) - -M98 Phomey.g ; Home Y - -M98 Phomex.g ; Home X - -M98 Phomez.g ; Home Z - -G1 X150 Y-47 F15000 ; Park diff --git a/sys/homec.g b/sys/homec.g deleted file mode 100644 index 584642c..0000000 --- a/sys/homec.g +++ /dev/null @@ -1,13 +0,0 @@ -; homec.g -; called to home the C axis (coupler) - -;crashc -G92 C260 -M913 C40 ; C MOTOR TO 40% CURRENT -G1 C-260 F2400 ; drive the C-axis to the stop -M913 C100 ; C MOTOR TO 100% CURRENT -G1 C1 F50000 -G92 C0 - -;Open Coupler -M98 P/macros/Coupler - Unlock diff --git a/sys/homex.g b/sys/homex.g deleted file mode 100644 index ce3bde5..0000000 --- a/sys/homex.g +++ /dev/null @@ -1,25 +0,0 @@ -; homex.g -; called to home the x axis - -G91 ; use relative positioning - -G1 S2 X0.5 Y-0.5 F10000 ; energise to avaoid false triggers during sensorless homing - -M400 ; make sure everything has stopped before we make changes -G4 P100 ; wait 100ms - -M913 X25 Y25 ; drop motor currents to 50% -M915 H200 X Y S4 R0 F0 ; set X and Y to sensitivity 3, do nothing when stall, unfiltered - -G1 S2 Z3 F5000 ; lift Z 3mm -G1 S1 X-400 F3000 ; move left 400mm, stopping at the endstop -G1 S1 X2 F2000 ; move away from end -G1 S2 Z-3 F1200 ; lower Z -G90 ; back to absolute positioning - -M400 ; make sure everything has stopped before we reset the motor currents -G4 P100 ; wait 100ms -M913 X100 Y100 ; motor currents back to 100% - - - diff --git a/sys/homey.g b/sys/homey.g deleted file mode 100644 index ea56edf..0000000 --- a/sys/homey.g +++ /dev/null @@ -1,24 +0,0 @@ -; homey.g -; called to home the Y axis - -G91 ; use relative positioning - -G1 S2 X0.5 Y-0.5 F10000 ; energise to avaoid false triggers during sensorless homing - -M400 ; make sure everything has stopped before we make changes -G4 P100 ; wait 100ms - -M913 X20 Y20 ; drop motor currents to 20% -M915 H200 X Y S3 R0 F0 ; set X and Y to sensitivity 3, do nothing when stall, unfiltered - - -G1 S2 Z3 F5000 ; lift Z 3mm -G1 S1 Y-400 F3000 ; move to the front 400mm, stopping at the endstop -G1 S1 Y2 F2000 ; move away from end -G1 S2 Z-3 F1200 ; lower Z -G90 ; back to absolute positioning - -M400 ; make sure everything has stopped before we reset the motor currents -G4 P100 ; wait 100ms -M913 X100 Y100 ; motor currents back to 100% - diff --git a/sys/homez.g b/sys/homez.g deleted file mode 100644 index 5a91dd2..0000000 --- a/sys/homez.g +++ /dev/null @@ -1,28 +0,0 @@ -; homez.g -; called to home the Z axis - -T-1 ;just in case there is a tool coupled, go try to drop it at the dock - -M98 P/macros/Coupler - Unlock ;Open Coupler - -G91 ; Relative mode -G1 S2 Z5 F5000 ; Lower the bed -G90 ; back to absolute positioning - -G1 X150 Y100 F50000 ; Position the endstop above the bed centre - -G91 ; Relative mode - -G4 P500 ; wait 500msec -G1 Z-300 S1 F1000 ; Move Z down until the switch triggers (first pass) - -G4 P500 ; wait 500msec -G1 Z5 F5000 ; Lift Z - -G4 P500 ; wait 500msec -G1 Z-300 S1 F300 ; Move Z down until the switch triggers (second pass) - -G4 P500 ; wait 500msec -G1 Z5 F5000 ; Drop the Bed - -G90 ; Back to absolute positioning diff --git a/sys/pause.g b/sys/pause.g deleted file mode 100644 index a483908..0000000 --- a/sys/pause.g +++ /dev/null @@ -1,4 +0,0 @@ -G91 ; use relative positioning -G1 S2 Z5 F5000 ; lift Z 5mm -G90 ; back to absolute positioning -G1 X-10 Y200 F50000 ; move out the way. diff --git a/sys/prime.g b/sys/prime.g deleted file mode 100644 index fde98ec..0000000 --- a/sys/prime.g +++ /dev/null @@ -1,31 +0,0 @@ -;brush in -G1 X-32.5 Y124 F50000 -G1 X-35.5 Y155 F50000 -G1 X-38.5 Y124 F50000 -G1 X-41.5 Y155 F50000 - -;Park for prime/purge -G1 X-37.5 Y176 F50000 - -;Prime -G92 E0 -G1 E10 F200 -G1 F50 -G1 E5 F50 -G1 E-0.25 F200 -G92 E0 -;G4 S2 - -;Run Out -G1 X-37.5 Y160 F50000 - -;Brush Out -G1 X-41.5 Y155 F50000 -G1 X-32.5 Y150 F50000 -G1 X-41.5 Y145 F50000 -G1 X-32.5 Y140 F50000 -G1 X-41.5 Y135 F50000 -G1 X-32.5 Y130 F50000 -G1 X-41.5 Y125 F50000 - - diff --git a/sys/purge.g b/sys/purge.g deleted file mode 100644 index 15b476c..0000000 --- a/sys/purge.g +++ /dev/null @@ -1,31 +0,0 @@ -;brush in -G1 X-41.5 Y125 F50000 -G1 X-32.5 Y130 F50000 -G1 X-41.5 Y135 F50000 -G1 X-32.5 Y140 F50000 -G1 X-41.5 Y145 F50000 -G1 X-32.5 Y150 F50000 -G1 X-41.5 Y155 F50000 - -;Park for prime/purge -G1 X-37.5 Y176 F50000 - -;Purge -G92 E0 -G1 F200 -G1 E12 F200 -G92 E0 -G1 E-8 F2750 -G4 S4 - -;Run Out -G1 X-37.5 Y160 F50000 - -;Brush Out -G1 X-41.5 Y155 F50000 -G1 X-38.5 Y124 F50000 -G1 X-35.5 Y155 F50000 -G1 X-32.5 Y124 F50000 - - - diff --git a/sys/tfree0.g b/sys/tfree0.g deleted file mode 100644 index 01f826d..0000000 --- a/sys/tfree0.g +++ /dev/null @@ -1,27 +0,0 @@ -; tfree0.g -; called when tool 0 is freed - -;Drop the bed -G91 -G1 Z4 F1000 -G90 - -;mesh levelling off -G29 S2 - -;Purge nozzle -;M98 Ppurge.g - -;Move In -G53 G1 X-10.5 Y150 F50000 -G53 G1 Y220 F50000 -G53 G1 Y242 F5000 - -;Open Coupler -M98 P/macros/Coupler - Unlock - -;fan off -M106 P2 S0 - -;Move Out -G53 G1 Y175 F50000 diff --git a/sys/tfree1.g b/sys/tfree1.g deleted file mode 100644 index 78a236d..0000000 --- a/sys/tfree1.g +++ /dev/null @@ -1,27 +0,0 @@ -; tfree1.g -; called when tool 1 is freed - -;Drop the bed -G91 -G1 Z4 F1000 -G90 - -;mesh levelling off -G29 S2 - -;Purge nozzle -;M98 Ppurge.g - -;Move In -G53 G1 X79.5 Y150 F50000 -G53 G1 Y220 F50000 -G53 G1 Y242 F5000 - -;Open Coupler -M98 P/macros/Coupler - Unlock - -;fan off -M106 P4 S0 - -;Move Out -G53 G1 Y175 F50000 diff --git a/sys/tfree2.g b/sys/tfree2.g deleted file mode 100644 index dd90414..0000000 --- a/sys/tfree2.g +++ /dev/null @@ -1,27 +0,0 @@ -; tfree2.g -; called when tool 2 is freed - -;Drop the bed -G91 -G1 Z4 F1000 -G90 - -;mesh levelling off -G29 S2 - -;Purge nozzle -;M98 Ppurge.g - -;Move In -G53 G1 X214.5 Y150 F50000 -G53 G1 Y220 F50000 -G53 G1 Y242 F5000 - -;Open Coupler -M98 P/macros/Coupler - Unlock - -;fan off -M106 P6 S0 - -;Move Out -G53 G1 Y175 F50000 diff --git a/sys/tfree3.g b/sys/tfree3.g deleted file mode 100644 index 1febb5a..0000000 --- a/sys/tfree3.g +++ /dev/null @@ -1,27 +0,0 @@ -; tfree3.g -; called when tool 3 is freed - -;Drop the bed -G91 -G1 Z4 F1000 -G90 - -;mesh levelling off -G29 S2 - -;Purge nozzle -;M98 Ppurge.g - -;Move In -G53 G1 X304.5 Y150 F50000 -G53 G1 Y220 F50000 -G53 G1 Y242 F5000 - -;Open Coupler -M98 P/macros/Coupler - Unlock - -;fan off -M106 P8 S0 - -;Move Out -G53 G1 Y175 F50000 diff --git a/sys/tpost0.g b/sys/tpost0.g deleted file mode 100644 index 9f33335..0000000 --- a/sys/tpost0.g +++ /dev/null @@ -1,14 +0,0 @@ -; tpost0.g -; called after tool 0 has been selected - -;heatup -M116 P0 - -;prime nozzle -;M98 Pprime.g - -;mesh levelling on -G29 S1 - -;PCF fan on -M106 P2 R2 diff --git a/sys/tpost1.g b/sys/tpost1.g deleted file mode 100644 index 032a275..0000000 --- a/sys/tpost1.g +++ /dev/null @@ -1,14 +0,0 @@ -; tpost1.g -; called after tool 1 has been selected - -;heatup -M116 P1 - -;prime nozzle -;M98 Pprime.g - -;mesh levelling on -G29 S1 - -;PCF fan on -M106 P4 R2 diff --git a/sys/tpost2.g b/sys/tpost2.g deleted file mode 100644 index 27a0885..0000000 --- a/sys/tpost2.g +++ /dev/null @@ -1,14 +0,0 @@ -; tpost2.g -; called after tool 2 has been selected - -;heatup -M116 P2 - -;prime nozzle -;M98 Pprime.g - -;mesh levelling on -G29 S1 - -;PCF fan on -M106 P6 R2 diff --git a/sys/tpost3.g b/sys/tpost3.g deleted file mode 100644 index 0f5a270..0000000 --- a/sys/tpost3.g +++ /dev/null @@ -1,14 +0,0 @@ -; tpost3.g -; called after tool 3 has been selected - -;heatup -M116 P3 - -;prime nozzle -;M98 Pprime.g - -;mesh levelling on -G29 S1 - -;PCF fan on -M106 P8 R2 diff --git a/sys/tpre0.g b/sys/tpre0.g deleted file mode 100644 index 2d49ba9..0000000 --- a/sys/tpre0.g +++ /dev/null @@ -1,27 +0,0 @@ -; tpre0.g -; called before tool 0 is selected - -;Unlock Coupler -M98 P/macros/Coupler - Unlock - -;Move to location -G1 X-10.5 Y200 F50000 - -;Move in -G1 Y230 F50000 - -;Collect -G1 Y242.5 F2500 - -;Close Coupler -M98 P/macros/Coupler - Lock - -;WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! -;if you are using non-standard length hotends ensure the bed is lowered enough BEFORE undocking the tool! -G91 -G1 Z10 F1000 -G90 - -;Move Out -G1 Y150 F4000 - diff --git a/sys/tpre1.g b/sys/tpre1.g deleted file mode 100644 index 872aad2..0000000 --- a/sys/tpre1.g +++ /dev/null @@ -1,26 +0,0 @@ -; tpre1.g -; called before tool 1 is selected - -;Unlock Coupler -M98 P/macros/Coupler - Unlock - -;Move to location -G1 X79.5 Y200 F50000 - -;Move in -G1 Y230 F50000 - -;Collect -G1 Y242.5 F2500 - -;Close Coupler -M98 P/macros/Coupler - Lock - -;WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! -;if you are using non-standard length hotends ensure the bed is lowered enough BEFORE undocking the tool! -G91 -G1 Z10 F1000 -G90 - -;Move Out -G1 Y150 F4000 diff --git a/sys/tpre2.g b/sys/tpre2.g deleted file mode 100644 index ec04300..0000000 --- a/sys/tpre2.g +++ /dev/null @@ -1,26 +0,0 @@ -; tpre2.g -; called before tool 2 is selected - -;Unlock Coupler -M98 P/macros/Coupler - Unlock - -;Move to location -G1 X214.5 Y200 F50000 - -;Move in -G1 Y230 F50000 - -;Collect -G1 Y242.5 F2500 - -;Close Coupler -M98 P/macros/Coupler - Lock - -;WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! -;if you are using non-standard length hotends ensure the bed is lowered enough BEFORE undocking the tool! -G91 -G1 Z10 F1000 -G90 - -;Move Out -G1 Y150 F4000 diff --git a/sys/tpre3.g b/sys/tpre3.g deleted file mode 100644 index c594f4e..0000000 --- a/sys/tpre3.g +++ /dev/null @@ -1,27 +0,0 @@ -; tpre3.g -; called before tool 3 is selected - -;Unlock Coupler -M98 P/macros/Coupler - Unlock - -;Move to location -G1 X304.5 Y200 F50000 - -;Move in -G1 Y230 F50000 - -;Collect -G1 Y242.5 F2500 - -;Close Coupler -M98 P/macros/Coupler - Lock - -;WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! -;if you are using non-standard length hotends ensure the bed is lowered enough BEFORE undocking the tool! -G91 -G1 Z10 F1000 -G90 - -;Move Out -G1 Y150 F4000 - -- GitLab